QSG 16 + 40

Hybrid air heater with booster, 56 kW

  • Quick heating by booster
  • Up to 60% lower energy consumption
  • Hydrogen ready
  • Heats and cools
  • Up to 70% reduction of CO2 emissions
QSG 16 + 40

Hybrid air heater with booster, 56 kW

  • Quick heating by booster
  • Up to 60% lower energy consumption
  • Hydrogen ready
  • Heats and cools
  • Up to 70% reduction of CO2 emissions

Description

The hybrid air heater QSG 16+40 consists of a heat pump of 16 kW and an inside unit with water coil, an axial fan and a gas fired booster of 40 kW. With a total capacity of 56 kW the largest Qwikshift Hybrid Heater and suitable for a large range of industrial rooms. The water coil with modulating EC fan are the heat release system for the heat pump. The booster is a condensing gas fired air heater with high efficiency which is activated when the heat pump does not supply enough heat to reach the set room temperature.
At the front of the heater a discharge grill with adjustable louvres takes care of an even air distribution in the room. Preferably, complemented with destratification fans.
During the summer the QSG can be set in a comfortable cooling mode.

Efficient energy management

The Smart Controller controls both the heat pump and the indoor unit based on the measured room temperature and determines when the booster should jump in. By choosing, this can be done partly on the basis of the user's programmed gas- and electricity rates. The QSG can also be connected to a building management system so that the user can monitor the performance of the system and improve it even more.

Smart Grid Ready         Modbus logo

Features

  • with high efficiency gasbooster
  • heating capacity 56 kW (16 kW heat pump + 40 kW booster)
  • cooling (at water temperature >7°C)
  • efficient and silent EC fan motor
  • modulation of discharge air
  • low NOx emission 
  • suspension on wall brackets or threaded bar
  • simple installation

Technical features

Total heating capacity 54.5kW
Heating power gas heating 38.8kW
Heat emission heat pump heat exchanger at 20 °C 35/30 15.7kW
Cooling capacity heat pump heat exchanger at 27 °C 12/17 15.4kW
Gas consumption low-calorific natural gas (G25) 4.8m³/h
Air volume 1206m³/h - 6700m³/h
Max. throw horizontal 25m
Modulating burner control Yes
Supporting protocol for Modbus Yes
Connection voltage 230V - 230V
Nominal current 3.2A
Supplementary electricity consumption in standby-mode (Psb) 7W
Fuel connection External thread
Connection heat pump External thread
Nominal diameter connections heat pump 1 inch (25)
Min. mounting height (horizontal air distribution) 2.7m
Sound pressure level at height of 5 metres 35dB(A) - 62dB(A)
Water content 6.6l
Weight including filling 160kg
Gas consumption high-calorific natural gas (G20) 4.2m³/h
Weight including filling 155kg
Gas consumption propane (G31) 3.2kg/h

Images

Accessories

Aansturingen
Ophangingen
Rookgasafvoermateriaal
Overig
HPX 16

Service parts

View our service parts for the QSG 16 + 40 (and earlier models) in the parts shop.

Parts shop

The Qwikshift QSQ is a hybrid heater which combines a heat pump with a innovative gas fired booster and smart control.

All Winterwarm QSG types