DXE heater Winterwarm DXE-series Winterwarm presents the DXE series. This unique heating concept for poultry houses is situated in the external wall. The air to be heated is circulated through the heater via an air inlet on one side and blown out of the heater into the house again on the other side of the heater. Due to the positioning of the heater the combustion gases are exhausted to the outside and never enter the house. Advantages: considerable energy savings can be made as less ventilation is required, a lower humidity level, easy access is ensured and bio-security is enhanced as the control and combustion components are outside the house. Characteristics • installation outside the poultry house • insulated splashproof casing in neutral green colour • robust stainless steel tubular heatexchanger • high air output • 100% recirculation of return air • no combustion flue necessary • no CO2 in the house • energy savings up to 20% possible • 0-10V control possible • CE approved • easy to service • standard on/off • optional: 0-10V input • optional: reduced heatput • optional: high/low burnercontrol • wall flanges and 2 adjustable legs are delivered with the heater • easy to clean (IPX4D) 40 Measurements remote status reader 1 2 3 Interface board for modulating burner control • 0 - 10 V. analogue input (reacts between 2-10 V) • Entrance burner on/off • Entrance ventilation on/off • Reset function • Output failure signal • Output “in operation” signal Discharge cone top view front view side view 1030 DXE80: 760 DXE100: 920 1030 180 max. wall 300 190 ø ø130 205 310 2270 550 550 back view
RkJQdWJsaXNoZXIy MTE2OTgy