controls Controls for air heaters Winterwarm provides an extensive program of controls which guarantee optimal operation of their heaters. MultiTherm S Interface board for connection to a building management system IB5902 € 347 • Controls up to 8 heaters • 0-10 analogue input • Entrance for low-stage (reacts between 2 -10V) • Reset function • Connection for high-stage • Failure diagnosis • Summer ventilation MultiTherm C 34 remote sensor Power isolation switch IK5281 / IE5210 / IE5212 Necessary with each heater to be able to switch off the current during maintenance activities • IP65 • 4 poles IK5281 • 230-400V • 25 Amp. € 78 IE5210 • 690V • 63 Amp. € 211 IE5212 • 400V • 125 Amp. € 510 MultiTherm thermostat IX3911 € 180 IX3912 € 347 Functions MultiTherm S MultiTherm C Clock function no yes 10 programmable time blocks no yes Overtime program no yes Summer/winter time no yes Lets heater modulate on room temperature yes yes Summer ventilation yes yes Compensation for wall influence yes yes Intelligent (self optimizing) thermostat no yes Keyboard locking (incl. pincode) no yes Frost protection yes yes Failure diagnosis and reset per heater yes yes Low voltage current (24V.) yes yes Controls up to 8 heaters yes yes Temperature range 0 - 30°C yes yes Remote sensor possible (GA3929) no yes Enable/disable function via external switch (e.g. PIR, door switch) yes no IP20 yes yes On/off thermostat IP794209 € 175 • Water resistant to IP65 • on/off thermostat • 6 Amp. • Temperature range -20ºC-40ºC • 230 V. MTS with extra input relay GX3955 € 244 • 24 V. switch contact • to interrupt heat demand with an external signal MTC with extra input relay GX3956 € 446 • 24 V. switch contact • to interrupt heat demand with an external signal • connection to external clock possible • extra control between day and night
RkJQdWJsaXNoZXIy MTE2OTgy